mike
1.6 Laser
Vice Chairman
Posts: 68
|
Post by mike on Aug 18, 2013 19:26:15 GMT
That's the engine ,gearbox etc installed and the car started 1st time Oil pressure etc all good.Just the bonnet to put on.Will MOT and Tax and looking forward to taking both cars to the show.
|
|
|
Post by abz280 on Aug 19, 2013 0:22:27 GMT
Look forward to seeing them both ! You had a busy weekend to get to this stage.
|
|
mike
1.6 Laser
Vice Chairman
Posts: 68
|
Post by mike on Oct 12, 2013 15:50:27 GMT
That's the disc brake fitted all round now.300MM brembo up front and 260 solids at the back.
|
|
mike
1.6 Laser
Vice Chairman
Posts: 68
|
Post by mike on Oct 12, 2013 15:53:19 GMT
That's the disc brakes fitted all round now.300MM brembo up front and 260 solids at the back.Just the handbrake cable to fit,adjust and bleed the system.The 15" brookie alloys and new tyres fitted.Looks awesome.
|
|
|
Post by garyac on Oct 16, 2013 7:36:37 GMT
I'm going to have to get over to yours to see this setup it sounds awesome.
|
|
mike
1.6 Laser
Vice Chairman
Posts: 68
|
Post by mike on Nov 2, 2013 20:11:52 GMT
Bummer,one of the rear calipers is leaking at the handbrake return spring.Considering these were reconditioned units i'm not happy.Will need to replace them and bleed the brakes again i use silicone brake fluid and it ain't cheap.
|
|
|
Post by stuey650 on Nov 7, 2013 10:18:18 GMT
Not what you would expect of a recon calliper. I would have thought they would have pressure tested them.
|
|
mike
1.6 Laser
Vice Chairman
Posts: 68
|
Post by mike on Nov 7, 2013 18:29:28 GMT
Got a replacement and have now fitted it.Looking forward to a major workscope on the car over winter.
|
|
mike
1.6 Laser
Vice Chairman
Posts: 68
|
Post by mike on Nov 10, 2013 18:02:43 GMT
Going to put both 2.8s' off the road at the end of the month.Will start putting the swaymar back together with the efi installed over the winter.Going to remove the engine shortly and start the prep work.I will write some articles to put in the club magazine.
|
|